Plastic Pallets for Warehouse
Racking, Stacking and Circulation
Compare plastic pallet configurations for warehouse racking, floor and block stacking, and repeated material circulation. Select around the unit load, storage method, support conditions and handling frequency. Final suitability should be confirmed against the actual load, rack or floor support, stacking method and operating conditions.
Choose the Right Pallet for Your Warehouse Operation
Match the Pallet Structure to the Rack Support
Selective racks typically support pallets across front and rear beams, while drive-in systems may rely on narrower side rails. Pallet base design, reinforcement and load distribution must therefore be checked against the actual unsupported span and support geometry.
- BEST SUITED FOR
- Selective pallet racking, drive-in storage and other beam- or rail-supported systems.
- WHAT TO PRIORITIZE
- Rack span, support position, unit-load weight, load distribution and allowable deflection.
- RECOMMENDED STRUCTURES
- Reinforced three-runner, six-runner or double-sided pallets selected around the rack configuration.
- CONFIRM BEFORE ORDERING
- Clear span, beam or rail dimensions, load placement, pallet orientation and required safety margin.
Plan for Stable Floor and Block Stacking
Floor and block stacking place different demands on the pallet than rack storage. Selection should consider how the upper load transfers through the pallet, how the unit load behaves during stacking and how forklifts or pallet trucks enter and move the pallet.
- BEST SUITED FOR
- Floor storage, block stacking, staging areas and non-racked warehouse operations.
- WHAT TO PRIORITIZE
- Static load, stacking stability, deck support, load distribution and handling frequency.
- RECOMMENDED STRUCTURES
- Full-perimeter, six-runner or double-sided structures selected around the stacking method and load.
- CONFIRM BEFORE ORDERING
- Number of stacked loads, total load per level, floor condition, handling equipment and storage duration.
Match the Pallet to Repeated Warehouse Circulation
Warehouse circulation exposes pallets to repeated lifting, travel, placement and return cycles. Selection should balance dynamic load, fork-entry design, base structure and durability against the actual handling frequency and route.
- BEST SUITED FOR
- Internal warehouse transfers, production logistics, staging and repeated forklift or pallet-truck handling.
- WHAT TO PRIORITIZE
- Dynamic load, handling frequency, fork entry, impact exposure, route condition and unit-load stability.
- RECOMMENDED STRUCTURES
- Three-runner, six-runner or double-sided structures selected around the load and handling equipment.
- CONFIRM BEFORE ORDERING
- Unit-load weight and distribution, daily cycle frequency, fork dimensions, route condition and replacement expectations.
Plastic Pallets for Warehouse Racking, Stacking and Circulation
Compare plastic pallet configurations for warehouse racking, floor and block stacking, and repeated material circulation. Select around the unit load, storage method, support conditions and handling frequency. Final suitability should be confirmed against the actual load, rack or floor support, stacking method and operating conditions.
Recommended Pallets for Warehouse Racking, Stacking & Circulation
Compare selected models across common dimensions, load requirements and structural options for warehouse racking, floor and block stacking, and repeated warehouse circulation.
1111
110x110x15.5cm
490/40HQ
View Model & Inquire
1111-Welded
110x110x15cm
364/40HQ
View Model & Inquire
1208
120x80x15cm
485/40HQ
View Model & Inquire
1210-A
120x100x16.5cm
440/40HQ
View Model & Inquire
1210-B
120x100x15cm
374/40HQ
View Model & Inquire
1210-Welded
120x100x15cm
374/40HQ
View Model & Inquire
1312-Flat-Welded
130x120x16cm
344/40HQ
View Model & Inquire
1412-A-Welded
140x120x15cm
250/40HQ
View Model & Inquire
Compare All Warehouse Pallet Models
Review dimensions, static and dynamic load ratings, available rack load ratings, pallet structures and handling configurations to identify suitable models for your warehouse storage and material-handling operation.
← Swipe to view full table →
| Select | Product Series | Model | Dimensions (L × W × H, cm) | Static Load | Dynamic Load | Reference 40HQ Qty |
|---|---|---|---|---|---|---|
| Six Runner Series | 1010 | 100x100x15 | 4t | 1t | 456/40HQ | |
| Six Runner Series | 1111-A | 110x110x15 | 4t | 1t | 364/40HQ | |
| Six Runner Series | 1111-B | 110x110x15 | 6t | 1.2t | 364/40HQ | |
| Six Runner Series | 1111-C | 110x110x15 | 4t | 1t | 364/40HQ | |
| Six Runner Series | 1111-D | 110x110x15 | 4t | 1t | 364/40HQ | |
| Six Runner Series | 1111-E | 110x110x15 | 1.5t | 1t | 364/40HQ | |
| Six Runner Series | 1111-F | 110x110x12.5 | 4t | 1t | 428/40HQ | |
| Six Runner Series | 1111-G | 110x110x15 | 4t | 1t | 364/40HQ | |
| Six Runner Series | 1111-H | 110x110x15 | 6t | 1.5t | 364/40HQ | |
| Six Runner Series | 1111-I | 110x110x12.5 | 4t | 1t | 428/40HQ | |
| Six Runner Series | 1208 | 120x80x15 | 4t | 1t | 485/40HQ | |
| Six Runner Series | 1210-A | 120x100x15 | 4t | 1t | 374/40HQ | |
| Six Runner Series | 1210-B | 120x100x15 | 8t | 1.2t | 374/40HQ | |
| Six Runner Series | 1210-C | 120x100x15 | 8t | 1.2t | 374/40HQ | |
| Six Runner Series | 1210-Combination | 120x100x15 | 8t | 1.5t | 374/40HQ | |
| Six Runner Series | 1210-D | 120x100x12.5 | 4t | 1t | 440/40HQ | |
| Six Runner Series | 1210-E | 120x100x15 | 8t | 1t | 374/40HQ | |
| Six Runner Series | 1210-F | 120x100x15 | 4t | 1t | 374/40HQ | |
| Six Runner Series | 1210-Flat | 120x100x14 | 4t | 1.5t | 396/40HQ | |
| Six Runner Series | 1210-flat with Rim | 120x100x15 | 6t | 1.2t | 350/40HQ | |
| Six Runner Series | 1211 | 120x100x15 | 5t | 1.5t | 352/40HQ | |
| Six Runner Series | 1212 | 120x100x15 | 6t | 1.5t | 310/40HQ | |
| Six Runner Series | 1311-A | 130x110x15 | 8t | 1t | 312/40HQ | |
| Six Runner Series | 1311-B | 130x110x15 | 6t | 1.5t | 312/40HQ | |
| Six Runner Series | 1410 | 141x111x14 | 4t | 1t | 303/40HQ | |
| Six Runner Series | 1412 | 140x120x15 | 6t | 1.2t | 278/40HQ | |
| Three Runner Series | 1008 | 100x80x16 | 3t | 1t | 576/40HQ | |
| Three Runner Series | 1010 | 100x100x16 | 4t | 1t | 528/40HQ | |
| Three Runner Series | 1111 | 110x110x15.5 | 6t | 1.5t | 490/40HQ | |
| Three Runner Series | 1111-Flat | 110x110x15 | 6t | 1.5t | 476/40HQ | |
| Three Runner Series | 1150 | 115x115x15 | 6t | 1.5t | 522/40HQ | |
| Three Runner Series | 1208 | 120x80x15.5 | 4t | 1t | 550/40HQ | |
| Three Runner Series | 1208-Flat | 120x80x16 | 4t | 1t | 550/40HQ | |
| Three Runner Series | 1210-A | 120x100x16.5 | 6t | 1.5t | 440/40HQ | |
| Three Runner Series | 1210-B | 120x100x15.5 | 4t | 1t | 500/40HQ | |
| Three Runner Series | 1210-C | 120x100x15.5 | 4t | 1t | 500/40HQ | |
| Three Runner Series | 1210-Combination | 120x100x17 | 6t | 1.5t | 478/40HQ | |
| Three Runner Series | 1210-D | 120x100x16 | 6t | 1.5t | 440/40HQ | |
| Three Runner Series | 1210-E | 120x100x16 | 6t | 1.5t | 500/40HQ | |
| Three Runner Series | 1211-A | 120x100x15 | 6t | 1.5t | 500/40HQ | |
| Three Runner Series | 1211-B | 120x100x17 | 6t | 1.5t | 382/40HQ | |
| Three Runner Series | 1212-A | 120x120x16 | 6t | 1.5t | 390/40HQ | |
| Three Runner Series | 1212-B | 120x120x16.5 | 4t | 1t | 390/40HQ | |
| Three Runner Series | 1212-C | 120x120x17 | 6t | 1.5t | 364/40HQ | |
| Three Runner Series | 1250-Tobacco Special | 125x100x15 | 6t | 1.5t | 478/40HQ | |
| Three Runner Series | 1311-A | 130x110x15.5 | 6t | 1.5t | 411/40HQ | |
| Three Runner Series | 1311-B | 130x110x15.5 | 6t | 1.5t | 411/40HQ | |
| Three Runner Series | 1311-C | 130x110x15 | 6t | 1.5t | 411/40HQ | |
| Three Runner Series | 1312-Flat-Welded | 130x120x16 | 6t | 1.5t | 344/40HQ | |
| Three Runner Series | 1412 | 140x120x15 | 4t | 1.5t | — | |
| Three Runner Series | 1512 | 150x120x15.5 | 4t | 1.2t | — | |
| Three Runner Series | 1513 | 150x130x15.5 | 4t | 1.2t | — | |
| Nine-foot Series | 1210 | 120x100x14 | 4t | 1t | 500/40HQ | |
| Nine-foot Series | 1210-A-Flat | 120x100x14 | 4t | 1t | 396/40HQ | |
| Nine-foot Series | 1210-B-Flat | 120x100x14 | 4t | 1t | 500/40HQ | |
| Nine-foot Series | 1412 | 140x120x14.5 | 6t | 1t | 278/40HQ | |
| Nine-foot Series | 1515-Welded Single-sided | 150x150x7.6 | 4t | 1t | 352/40HQ | |
| Nine-foot Series | 1614-Welded Single-sided | 160x140x7.6 | 4t | 1t | 372/40HQ | |
| Double-sided Series | 1109-Flat-Welded | 110x90x15 | 5t | 1.5t | 450/40HQ | |
| Double-sided Series | 1111-A | 110x110x15 | 6t | 1t | 364/40HQ | |
| Double-sided Series | 1111-B | 110x110x15 | 6t | 1.5t | 364/40HQ | |
| Double-sided Series | 1111-Flat-Welded | 110x110x15 | 8t | 2t | 364/40HQ | |
| Double-sided Series | 1111-Welded | 110x110x15 | 8t | 2t | 364/40HQ | |
| Double-sided Series | 1210-A | 120x100x15 | 6t | 1.5t | 374/40HQ | |
| Double-sided Series | 1210-B | 120x100x15 | 6t | 1.5t | 374/40HQ | |
| Double-sided Series | 1210-Flat-Welded | 120x100x15 | 8t | 2t | 374/40HQ | |
| Double-sided Series | 1210-Flat-Welded-No-Steel-Pipe-Option | 120x100x15 | 8t | 2t | 374/40HQ | |
| Double-sided Series | 1210-Welded | 120x100x15 | 8t | 2t | 374/40HQ | |
| Double-sided Series | 1211-Flat-Welded | 120x110x15 | 6t | 1.5t | 340/40HQ | |
| Double-sided Series | 1211-Welded | 120x110x15 | 6t | 2t | 340/40HQ | |
| Double-sided Series | 1212-A | 120x120x15 | 6t | 1.5t | 310/40HQ | |
| Double-sided Series | 1212-B | 120x120x15 | 8t | 1.8t | 310/40HQ | |
| Double-sided Series | 1311 | 120x110x15 | 6t | 1.5t | 312/40HQ | |
| Double-sided Series | 1311-Flat-Welded | 130x110x15 | 6t | 1.5t | 312/40HQ | |
| Double-sided Series | 1311-Welded | 130x110x15 | 6t | 1.5t | 312/40HQ | |
| Double-sided Series | 1340-Flat-Welded | 134x81x15 | 6t | 1.5t | 388/40HQ | |
| Double-sided Series | 1411 | 140x110x15 | 8t | 2t | 287/40HQ | |
| Double-sided Series | 1412-A | 140x120x15 | 6t | 1.5t | 278/40HQ | |
| Double-sided Series | 1412-A-Welded | 140x120x15 | 8t | 2t | 250/40HQ | |
| Double-sided Series | 1412-B | 140x120x15 | 6t | 1.5t | 278/40HQ | |
| Double-sided Series | 1412-B-Welded | 140x120x15 | 6t | 2t | 278/40HQ | |
| Double-sided Series | 1512 | 150x120x15 | 6t | 2t | 176/40HQ | |
| Double-sided Series | 1513 | 150x130x15 | 6t | 2t | 176/40HQ | |
| Double-sided Series | 1515-Welded | 150x150x15 | 10t | 2t | 176/40HQ | |
| Double-sided Series | 1614 | 160x140x15 | 10t | 2t | 172/40HQ | |
| Double-sided Series | 1614-Welded | 160x140x15 | 10t | 2t | 172/40HQ |
Why Warehouse Buyers Choose Brilliant Pallet
Brilliant Pallet combines warehouse-focused model selection, application review and specification control to support reliable racking, stable stacking and efficient repeat circulation.
Warehouse-Matched Selection
Brilliant helps buyers compare pallet footprints, base structures and model-specific load ratings against the actual unit load, storage method and warehouse operation.
Rack & Support Review
Rack span, beam or rail support, load distribution and deflection requirements are reviewed together to narrow suitable pallet configurations for project validation.
Handling & Circulation Fit
Fork entry, tine spacing, pallet orientation and base design are compared with the handling equipment, transfer routes and circulation frequency.
Reliable Repeat Supply
Confirmed model, material, reinforcement, color, marking, quantity and delivery requirements provide a clear specification basis for repeat warehouse orders.
Brilliant Pallet Capability Overview
From manufacturing scale and tooling resources to certified systems and international supply experience, Brilliant Pallet provides the operational foundation for bulk orders, custom projects, and repeat supply.
Manufacturing Scale
Integrated production and storage resources support planned production, volume orders, and repeat purchasing.
70,182 m²Integrated factory and storage base
7.1M+Planned annual pallet capacity
Product & Tooling Resources
An extensive product and mold base gives buyers more standard formats to compare and a stronger foundation for project-specific requirements.
200+Product specifications
700+Mold sets
Certified Systems & Engineering
Certified management systems and accumulated product development experience support controlled manufacturing and ongoing product improvement.
ISO9001 / 14001 / 45001 certified systems
50+Product patents
Global Supply Experience
Long-term manufacturing and international project experience support specification confirmation, order coordination, and repeat overseas supply.
100+Exporting countries
25+Years manufacturing experience
OEM/ODM Custom Plastic Pallet Options
Customization options include color, logo marking, material selection, anti-slip components, runner configurations and reinforcement solutions, subject to pallet model, order quantity and production feasibility.
Color Customization
Color requirements can be reviewed according to the selected pallet model, material and order quantity.
- Standard or project-specific color review
- MOQ and lead time confirmed before quotation
Branding & Identification
Marking options can be reviewed against the available area, artwork, pallet structure and order quantity.
- Logo, numbering or identification review
- Method, setup and cost confirmed by project
Material Selection
Choose from confirmed HDPE and PP material options according to your application, performance requirements and selected pallet model.
- HDPE / PP Virgin Material
- HDPE / PP Modified Material
- HDPE / PP Recycled Material
Stability & Load Enhancements
Anti-slip, runner and reinforcement options can be reviewed individually or combined around your load, storage and handling requirements.
- Anti-slip options for improved load stability
- Runner configurations matched to handling needs
- Reinforcement solutions reviewed for compatible models
-
01
Requirement
Review -
02
Model & Feasibility
Assessment -
03
Design & Tooling
Confirmation -
04
Sample Approval
When Required -
05
Production, QC &
Shipment
Reliable Manufacturing at Scale
Advanced equipment, controlled production, documented certifications, warehouse handling and customer-facing activity provide a clearer view of manufacturing capability and supply support.
Injection molding equipment for plastic pallet production.
The factory operates injection molding and related production equipment used to manufacture plastic pallets across different structures and specifications.
Certificates and supporting documents for procurement review.
Available documentation covers quality and environmental management, occupational health and safety, technical inspection and business credentials. Relevant documents can be reviewed according to procurement requirements.
Production from material preparation to finished pallets.
The production sequence covers material preparation, injection molding, trimming, inspection and finished-product staging, showing how plastic pallets move through the factory.
Finished-pallet storage and forklift handling.
Finished pallets are stacked in designated warehouse areas and moved by forklift during routine storage and outbound handling.
Plastic Pallet MOQ, Lead Time & Pricing
Ordering requirements vary by pallet model, quantity and customization. Share your project needs to receive a clear quotation, estimated production lead time and available ordering options.
MOQ
- Minimum order quantity varies by model, material and customization requirements.
- Full-container and mixed-model loading options can be reviewed based on the selected models and total order quantity.
Lead Time
- Production lead time depends on model availability, order volume and customization requirements.
- Custom color, logo, RFID, reinforcement or new mold requirements may require additional confirmation and production time.
Pricing Factors
- Pricing is affected by material grade, pallet weight, structure, reinforcement, order quantity, color, logo, RFID options and resin market conditions.
- Freight and destination requirements should be evaluated separately when comparing landed cost.
Samples
- Sample availability, cost and delivery time depend on the selected model and destination.
- When performance evaluation is required, confirm the intended load, support conditions and test method before testing the sample.
Plastic Pallets for Warehouse Racking, Stacking and Circulation FAQs
Answers to common questions about model selection, materials, export shipping, air freight, FIBC handling, customization and container loading.
What information is needed to review a warehouse pallet?
Provide the application—racking, stacking or circulation—plus unit-load dimensions and weight, load distribution, pallet orientation, support conditions, handling equipment, operating environment, quantity and project location.
Are published static, dynamic and rack load values enough to approve a model?
No. Published values are catalog references under stated conditions. Approval must also consider the actual support position, unsupported span, load distribution, storage duration, allowable deflection and required safety margin.
Can the same pallet be used in selective and drive-in racking?
Possibly, but the support geometry is different. Selective racks commonly support the pallet on front and rear beams, while drive-in systems may use narrower side rails. Confirm rail or beam dimensions, pallet orientation, load placement and deflection before approval.
What should be reviewed for repeated warehouse circulation?
Review dynamic load, fork-entry clearances, base structure, handling frequency, route and floor conditions, transfer points, impact exposure and unit-load stability. A load rating alone does not confirm suitability for the complete circulation cycle.
When should steel-pipe reinforcement and deflection be reviewed?
Review reinforcement whenever the pallet spans rack beams or rails, carries concentrated or uneven loads, remains loaded for extended periods, or must meet a project deflection limit. The steel-pipe configuration must be checked for the selected model and support condition.
What operating conditions can change pallet suitability?
Temperature, hygiene and cleaning requirements, chemical exposure, floor condition, storage duration, handling frequency and impact risk can affect material and configuration selection. Confirm these conditions for the actual project.
Should we run a sample or representative trial before rollout?
Yes. A representative trial should reproduce the intended unit load, support geometry, storage duration and handling cycle so deflection, stability and equipment interfaces can be checked before volume rollout.
What should be included in a warehouse pallet RFQ?
Include the storage system, candidate models or required size, rack or equipment drawings, unit-load data, support points and span, allowable deflection, operating conditions, quantity, customization and delivery destination. Multiple shortlisted models may be included for review.
